A little over a year ago I unboxed my first embroidery machine and have been sharing my frustrations ever since. Don’t get me wrong, I LOVE my embroidery machine. I am simply stating that now I finally feel that I have somewhat mastered the machine. The first few times I used the machine I was nervous to do basically anything but now it’s more of an after thought / fun to create.
When I first opened the machine I searched for tutorials and there were not that many that actually showed how to use the machine. This is something I really wanted to change because it can be hard to simply learn through trial and error or understand the instructional booklet. So, when I was asked for guidance on some starter tasks with the machine I knew it was something I wished had been there for me.
Below is a video of mini starter tutorials that are straight through. I hate fluff in between when I am looking for guidance; which is why I hope it will be beneficially for beginners or even people who are just interested in learning more about machine embroidery. Since the fluff is out of the video here is some fluff or more background.
The first tutorial is how to change the needle which can be intimidating. Things to consider are that you have the correct size for the machine used, and it has to be screwed on, not too loose or too tight. Only tighten until the bar with the screw is no longer able to be pushed up. Second is how to thread the machine’s upper thread. Incorrect threading can cause the needle to break so make sure each step is correct. In the tutorial I mention that I am not a fan of the stoppers that come with the machine. The stoppers in the past have caused the thread to catch and thus snap the needle in pieces. Last is the bobbin which can mess up the outcome of the embroidery stitches if it is not installed properly. I’ve talked about it in another video but that small silver piece is so important! Make sure it clicks because if is does not it will break off the thread, bunch up stitches or even break the needle.