Any embroidery file can be created into a patch. It may seem a bit daunting at first but it is possible. There are what I call “finished” patches that have a satin border around the edges and “base level” patches that are stitched on felt material. The main goal of both types is to prevent fraying. Neither option is honestly better than the other.
Last time we stitched out a cute little ballerina elephant design and in the video below I showcase how to turn it into a patch. Turning something into a patch is simple: either embroider it on felt or add a satin shaped border to a design. If you want the off-set outlined patches you’ll need to purchase some fancy software or a design that is already digitized that way.
There are a few of ways to adhere a patch; sewing, glueing, iron on, velcro and temporarily pinning. The approach you choose should be dependent on the material/item you are wanting to put the patch on. In this case I decided to add the patch to a small cosmetic bag that I will be using as a sewing tool bag. While it may seem simple to iron it on by adding Heat N Bond, there was an issue with the construction of the bag and material. So, I had to pivot to another method as you will see in the video below.
Overall, I am still very new to the world of patches because I have steered clear of them due to fear of not having the fancy software. Just try it! It’s no different than anything else you embroider. Perhaps the main takeaway from this project was that you can always try alternate ideas to accomplish the same outcome. Also using Heat N Bond on the back of raw stitches is less effective than adding an additional flat layer backing. Perhaps that will be another side by side comparison test later on.
Every machine embroidery enthusiast needs embroidery hoops. If you are just starting out you will most likely only use the one that came with your machine. Having more than one hoop can speed up your project time by being able to hoop while another design is stitching. Try branching out and using a sleeve hoop or a multi position hoop. My multi position hoop really pivoted my viewpoint on if I needed a larger machine.
Sharps can be intimidating, there are so many brands and types of machine needles on the market. My favorites are from the brand Organ Needles but also keep in mind if your needle is causing you trouble you may need a different type of needle for the specific type of material you are embroidering on. Another set of needles that are essential to have in your stash are hand embroidery needles and a seam ripper. When, not if, your design stitches out a little wonky, but not enough to scrap the entire project you can add or remove a few stitches.
Pins are a dime a dozen, use whatever you have or buy generic ones. I prefer quilting pins simply because they are longer which is great for blankets and keeping excess material from the field. Storage for needles and pins can be fun. Get creative, make your own or opt for one that puts a smile on your face. I love my snap bracelet cushion, not only its practicality of being literally attached to me, but also for the memories it holds. Magnetic pin holders are great for fast clean up but reaching into your sewing bag can be like stumbling onto a land mine.
Thread
Often thread gets overlooked but it is necessary to test out which ones work best for you. More expensive does not equal better quality. For example, my Sulky thread vs New Brothread: New Brothread is not only affordable, but an amazing quality thread. Make sure to upgrade to a thread that has a snap bottom to keep your thread box nice and neat. We can’t all live the luxe life of having an expansive craft room with every thread color imaginable on display so snap bottom it is. Hate winding bobbins? Buy them in bulk. Save the empty spools to rewind with various colors or even to use with your sewing machine if yours are the same like mine.
Stabilizers & More
Do not skip out of the stabilizer. It helps keep your material in place, adds structural stability to the material and can even prevent stitches for getting lost in the fuzz. My favorites are cut away and water soluble stabilizer. Save yourself some time and space by getting a precut pack. Another material to keep close by is a roll of Tender Touch. Tender Touch is a mesh material that irons onto the backside of your embroidery. Most commercial embroidery shirts, sweaters etc. use this to lock in the stitches as well as protect the skin from irritation.
Appliques
If you are doing machine embroidery you’ve probably stumbled across an appliqué file or two. Some tools that can make or break a design are Heat N’ Bond, basting spray and a curved pair of scissors. To pair with the Heat N’ Bond I recommend investing in a mini heat press. I use the Cricut mini press and medium Cricut protective heat-resistant mat which is perfect for ironing all of the small scraps I use for appliqué. The Heat N’ Bond glues the appliqué to the base as well as prevents all of the edges from fraying. Once your appliqué material is prepped, spray some basting adhesive to the back to keep it from moving while stitching. Never use your fingers to hold material in place inside of the stitching field, that is how emergency visits occur. A needle through the finger, no thank you. The curved scissors make trimming the excess material a breeze after the tack down stitch. They allow you close access to the line and a wider range of mobility.
Scissors
I already touched base on my MVP (most valuable pair) the curved scissors. Other types I keep on hand are the basic thread scissors. A nice pair of dressmaker sheers, if you are making blankets or larger sewing projects and add in a pair of pinking sheers to prevent frayed edges. The last pair of scissors I enjoy having in my craft bag are titanium rag snips. While the name is a bit misleading these guide through bulky fabric with sequins, leather, suede and more. Your hands will thank me.
Click here to view all of my favorite essentials to add to your craft cart/bag. Disclaimer: I do receive a small commission from Amazon if you shop through my links.
What is your favorite machine embroidery essential?
When using an embroidery file one thing among many I look for is how many times I have to change my thread. If you have a multi-needle machine this is not even on your radar but some of us are still struggling. One of the perks of Embrilliance essentials is being able to switch up the order of each color/ section of embroidery.
Creating a larger than hoop project can be frustrating and seem almost impossible at times. I am still using a 4×4 hoop but I’ve learned a few tricks along the way. For those who are not ready to invest in embroidery software, there is still a way to create the same results. I will however, admit that the investment in the software is worth every penny since it saves time and prevents frustrations.
The free software is called Embrilliance Express. The software I am using in the video may look a little different since I have paid for Embrilliance Essentials, but the functions I use in the tutorial are all available in the free version. First, in order to split the word you are embroidering, you will need to split it into multiple files. Part one should have the majority of the letters. Try to use only a couple of letters for part two to allow the machine more room to line up with the first section.
While posting videos about my embroidery machine a couple of people have asked how to fix the self thread feature. At the time I did not know how to help as I had never experienced an issue with the self threader on my embroidery machine. Fast forward a couple of months, now the self threader on my machine stopped working. Sometimes it would work and sometimes it wouldn’t. Once the self threader stopped working consistently, I decided to try to diagnose what was wrong.
Feeling like you’ve picked the wrong embroidery machine and contemplating purchasing a new one? Before paying out hundreds of dollars if not thousands on a new machine, try a multi-position hoop. Out growing a machine sucks but thankfully there are ways to hack the system to go beyond the hoop’s limitations.
Although using a multi-position hoop is not 100% free, it is a whole lot cheaper than a new machine. There are two things required for multi-position embroidery, software and a specific hoop. The software I chose is called Embrilliance Essentials, which cost $149.95. Multi-position hoops can be found on Amazon in sets or singles for around $15.99. These hoops have four notches rather than the standard two.